By k31s4. Corner Tv Stands. At Wednesday, October 30th 2019, 01:20:08 AM.
Follow the television manufacturer's instructions for attaching the wall mount to the back of the set. Most flat-panel TVs have a four-point mounting system on the back of the set. Four bolts or screws must be removed from the rear of the console. The wall mounting bracket attaches at these four points on the set.
They are part of a wide range of different furniture styles that you will have to choose between when you are looking for a way to store your home cinema equipment and flat screen TV.
Installing a wall-mount television in the corner can maximize the available space in the family room or home theater, since there may be limited wall space for big screens in houses with numerous windows, picture frames or other decorations. This article explains how to wall-mount a television in the corner of a room.
This piece was straightforward to assemble, and looks terrific, though there is a couple of places where it is easy to put the wrong part in the wrong place. In particular, I installed the doors on the wrong sides and upside down. This meant the handles were in the right place, but the break in the edge banding is visible on top of the doors when they are open, and I had to drill new holes to hold the metal to which the magnetic door closures stick. (Unfortunately I could not correct the error by removing and re-placing the doors due to the design of the hinge - It springs into place into a hole, which makes it a one-way operation.) That mistake was on me, which is why I gave the unit five stars for being otherwise terrific for the price. Note: One non-standard thing that I did during assembly was to glue everything together with wood glue. It is solid as a rock as a result, but I do not know to what degree that made it better than it otherwise would be.
Measure the front of your television. Unlike picture size, which is determined by measuring on a diagonal (lower left to upper right), the width of the TV is ascertained by measuring from the lower right corner to the lower left. Write this number down.
The shape of these stands mean that they are narrower at the back than the front, and so it is critical to consider the depth of AV components to ensure they fit inside. You are also unlikely to fit two pieces of equipment side-by-side due to the narrow design.